Merle,
Have you sent the report to ditsnbits@tentec.com? I hope everybody cc's
their (verified) bug info to the official address.
73 Martin AA6E
Merle Bone wrote:
> If you use a computer based keyer for contests you may run into this bug. If
> you have set the V2.062a CW menu to "PTT in CW as ......Mox," (Allows
> immediate return of the receiver after the last code element) there is a
> problem that surfaces if you have to do a Master Reset and reload the user
> settings. After the Master Reset/User Settings Reload, if you try to user the
> computer based keyer, the transmitter will come on when PTT is activated by
> the computer and remain in "key down mode" until PTT is released. The only
> way I have found to fix this bug is to go to the CW menu and change the "PTT"
> setting off from the "Mox" setting to either "Key" or "None" and then back to
> "Mox." After that the Orion will key CW normally from the computer. It looks
> like the "PTT in CW as .....Mox" setting is not getting picked up when the
> User settings are loaded, although the menu setting looks correct, and the
> Orion is defaulting to "PTT in CW as.....Key."
> 73, Merle - W0EWM
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|