One of the best investments in equipment I ever made was my EXTERNAL
KK7UQ IMD meter. It shows you precisely what's going on with your
PSK31 or PSK63 signal (and optionally signal strength). Check it out
at: http://www.rigexpert.com/IMDMeter.html
I found that relying on the ALC light on my Jupiter wasn't quite
what I needed to get the cleanest signal on PSK31.
de ken n9vv
Fred Lemley wrote:
> Jeremy,
>
> I have the optional fan from TenTec mounted on my heatsink and can run
> any power level I choose with it with no overheating. What you have to
> be careful about is the audio drive...on the Jupiter, whatever power
> level you're running make sure the ALC light is just barely flashing
> and your signal should be fairly clean.
>
> I would suggest testing with someone close to your location and let
> them monitor the "waterfall" and give you a signal report...everytime I
> change power levels I verify that I'm just barely lighting the ALC
> lamp. I've had no complaints so far with power levels up to 100
> watts...YMMV. Good luck and have fun with your Jupiter...I certainly
> have.
>
> Fred
> K5QBX
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|