TenTec
[Top] [All Lists]

Re: [TenTec] Omni V and 705 Mic issues...

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Omni V and 705 Mic issues...
From: Richards <jruing@ameritech.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 17 Aug 2009 21:07:15 -0400
List-post: <mailto:tentec@contesting.com>
Gee... I wonder if there is more than one issue here...

Have you checked the wiring diagram on the Shure mic?
Also same question about the TT mic?

I am thinking the one mic may be wired incorrectly and
the other may have another issue. I would trace all wiring diagrams out and see if there are differences in the way they are wired. That might eliminate some possible problems.

After you have traced the microphone wiring on both microphones, you will have either identified a problem, or eliminated a possible problem.

After checking the wiring diagrams... I would check each microphone with a continuity tester to see if the switches are going on and off as they should. Again... just a basic check to see if you can identify a problem in the microphone, or eliminate that as a possible problem.

After checking wiring and switch functionality, you can then look to relay problems in the rig. But these seem easier to check to me and you will either ID a problem, or eliminate some possibilities. These seem easiest to do first.

Just a thought...

==============  Richards - K8JHR  ===============


John Callari wrote:
It seems that something is wrong with the PTT as controlled via the PTT/VOX button on the face of the radio.


==================================================

<Prev in Thread] Current Thread [Next in Thread>