Have you tried unplugging the rig and letting it stand for awhile.
Dumb as it sounds, I have revived various computer systems this
way, whereas no efforts to reboot, clear the BIOS to factory settings,
or other forms of flashing the system would work. Sometimes just a
little time off with no power applied does it.
No guaranty, but this is a free item to try as I understand these
radios are kinda designed like computers inside.
Just something to try while waiting for other suggestions.
Good luck. ============== K8JHR =========================
----------------------------------------------------------------
On 10/14/2010 12:24 PM, Martin Sole wrote:
Power cycling,
> master resets, RAM clear resets all result in it sitting with a SYSTEM
> LOADING screen permanently. Only the flash update mode can be entered but
> without any serial comms nothing happens.
=================================================================
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|