I've downloaded the manual. Looks like a parallel mode crystal on 5.656
MHz. If you order from ICM or another crystal maker, send them a copy of
the module schematic page 3-18 of the Scout/Argo manual.
But if its available, Tentec should be the most economical source.
73, Jerry, K0CQ
On 10/21/2010 7:27 PM, Daniel Basnett wrote:
> I recently bought a used Scout and when checking out the 20m module, I found
> the it was intermittent. Sometimes it worked and sometimes not. I opened
> the case and when carefully inspecting it I found that the crystal was bent
> all the way over and one of the leads was loose and practically broken.
> Well, as soon as I touched it the lead broke completely. Now the module
> always causes the Scout display to show 142.0 indicating a module that is
> not installed correctly. My question - could I find a replacement for the
> crystal and replace it or should I just find replacement module? Thanks for
> any thoughts??
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|