Gollie
No updates for my Jupiter? Ah well...It still works. And there is an
update for my neat little Argonaut VI....maybe the 418 amp. Now that is
an improvement of some sort. Anyone have any experience with the little
418 100 W amplifier?
John WA1JG
On 11/6/2013 8:30 PM, Bob McGraw - K4TAX wrote:
Here's a message posted by Tentec Engineering as it relates to the
Omni VII, the Eagle and the Argonaut VI. I didn't see that it was
posted here so I took the liberty to do so.
73
Bob, K4TAX
----- Original Message ----- From: jhenry@tentec.com
Sent: Tuesday, November 05, 2013 3:59 PM
Subject: [TenTec_539] Status Update 11-5
Just to let all know.
I'm beta testing a new firmware for the Eagle and for the Argonaut VI.
The changes for the Eagle include:
1 - Modified pseudo AGC attack so that it is more resistant to loading
upon impulse noise
2 - Corrected occasional startup problem that caused the frequency to
jump up or down by 1 step.
3 - Improved algorithm for transmit to prevent over shoot when
changing input levels.
4 - Added 4khz and 8khz to bandwidth selection, (lost 3.125khz)
The changes for the Argonaut VI include:
1 - Modified pseudo AGC attack so that it is more resistant to loading
upon impulse noise
2 - Corrected occasional startup problem that caused the frequency to
jump up or down by 1 step. (very rarely happened, but put in same
change from the 599 to help ensure it doesn't)
If the beta guys say I haven't broken anything drastic, I'll create
official releases for them possibly this week, but most likely next
week. Need time to go through all of these beta releases better.
I do plan on adding VOX to the 539/Argonaut VI, but wanted to at least
get this release out as it really does improve re ceive audio
performance and subsequent NB and NR performance. And adding VOX would
take a few more days alone to do.
Have an OMNI-VII firmware in almost beta form for the AGC QRN fix and
also for Ethernet performance. Will see how the inputs were from the
weekend, then will get them the OnePlug changes, and may wrap that one
up as well in a week or two.
So, hopefully, if all goes well, I should be able to release 588 and
One Plug firmware in a week, possibly two, and also hopefully 599/539
firmware next week.
Will post this on a couple of forums,
Thanks, and 73,
John Henry, KI4JPL
TEN-TEC Engineering
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|