Excellent advise from Ken Brown!!
Both to fix it yourself and learn, or keep the rig and have Ten Tec go
thorough it. Many things can fail in shipping a rig back from any
manufacturer. It could be as simple as a bad connection, or it could be
failed component or just drift in the calibration pot setting, maybe
from a jar in shipping. Good ideas Ken has also, on using a known good
receiver as a frequency counter and how to couple to the BFO oscillator.
With most hams having a couple digital readout rigs, you have the
makings of a perfectly satisfactory for ham purposes, frequency
measuring set up, if one of the radios is a general coverage receiver.
Stuart Rohre
K5KVH
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|