Any one know when Ten-Tec stopped production on the Omni VI and started
building the Omni VI Plus?
When was the last Omni plus built?
John
KC0YAI
At 07:48 AM 11/27/2006, you wrote:
>I have two Omni VI's. Each is an Option 3 upgrade of early 90's vintage.
>
>One (SN 03A10375) has cover plates over the filter access holes and one
>(SN11A10154) does not. The one without covers came from the factory that
>way.
>
>It appears that around the beginning of 1995, Ten Tec added them.
>
> Jim N4AL
>
>-------------------
>tentec-request@contesting.com wrote:
>
>Date: Sun, 26 Nov 2006 16:01:47 -1000
>From: Ken Brown <ken.d.brown@hawaiiantel.net>
>Subject: [TenTec] Shields in Omni VI
>To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
>Message-ID: <456A470B.5090905@hawaiiantel.net>
>Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
>Hi Steve,
>
>The photos in the manual for my Omni VI do not show any of the shielding
>in place. I was wondering if I was confused and that the cover plates I
>remembered are in my Paragon and not in the Omni VI. When I read the
>manual for the Omni VI in the section describing how to install the
>optional filters, it clearly states that you need to "Remove the panel
>covering the PBT board" or "Remove the panel covering the 9 MHz filter
>board." So, even without opening up my Omni VI, I think I can say with a
>fair degree of certainty, "Yes there should be cover plates over the 9
>MHz and 6.3 MHz optional filter access holes." I will be interested to
>hear whether adding shielding plates over those holes makes the birdie
>go away.
>
>Ken N6KB
>
>Steve Hunt wrote:
>Ken,
>
>I only just spotted your question about shield covers over the optional
>filter slots.
>
>There aren't any - just holes! Should there be? I don't recall seeing
>any obvious fixing holes for covers or I might have been suspicious.
>
>73,
>Steve G3TXQ
>
>
>_______________________________________________
>TenTec mailing list
>TenTec@contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec
>
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Free Edition.
>Version: 7.1.409 / Virus Database: 268.14.14/548 - Release Date: 11/23/2006
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.409 / Virus Database: 268.14.14/548 - Release Date: 11/23/2006
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|