Bob;
My concern is that the supply may be noisy in as much the original application
was not an RF environment. You may need to add CORCOM line filtering and add
large torroids on the DC output. In many original instances the filters were
part of the mainframe and not in the supply.
If this is a linear supply the issue of noise or RFI is much less. Still, some
filtering may be needed.
If it is a switch mode supply, I’d say you have a good “science project” with
regard to noise elimination.
Bob, K4TAX
Sent from my iPhone
> On Jul 17, 2020, at 12:08 PM, Bob D. <ajamas.rn@gmail.com> wrote:
>
> I've been using a HP server supply, 12.5 V 100A or a marine battery to
> power a Tentec 420 amp. I'd like to have the collector voltage at full spec
> so am considering a Meanwell 15 V 100 A supply.
>
> If anyone knows, I'd like to learn:
> Noise levels from this supply.
> Source of an inexpensive enclosure.
> How well it works if powered on and off between transmissions.
>
> -bob ah7i em73ts
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|