-----Original Message-----
From: Dr. Gerald N. Johnson <geraldj@weather.net>
To: tentec@contesting.com
Sent: Tue, Oct 5, 2010 3:44 pm
Subject: Re: [TenTec] Omni VI on the fritz
And any board mounting screws that often are ground connections. The
lastic material relaxes the contact pressure, the very definition of
plastic."
73, Jerry, K0CQ
On 10/5/2010 5:17 PM, Joe Roberts wrote:
First thing I would do whenever one of the later Omnis I have owned did
something crazy is clean the power supply connectors thoroughly with
Deoxit.
I have seen some very strange phenomena due to dirty PS connectors and
what you describe is in the general line of my experiences, i.e. winding
up in some odd in-between mode of operation.
Anyway, it is free and it takes 5 minutes.
Next I would look at connectors on the boards. Unplug, clean, and reseat.
Beyond that see what TT has to say tomorrow.
Joe N5KAT
On 10/5/2010 6:07 PM, Roger Rippy wrote:
> I have a problem and wonder if anyone else has experienced
> the same problem with an Omni VI. Since I bought this rig
> from a fellow ham back in late Spring 2010, the rig will
> occasionally loose all input control, the frequency goes to
> 14000, the mode goes from CW to Tune,I cannot transmit,there
> is a steady tone (sometimes) but no plate current. This may
> happen randomly once a month or every few weeks, Up until now
> it would clear itself, or I could clear it with either a partial
> or master reset. Not today though! I would call TT and pick
> Paul's brain, but they are closed for the day. Any ideas out
> there? Thanks
> Roger Rippy W7RIP Bozeman, Montana
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
______________________________________________
enTec mailing list
enTec@contesting.com
ttp://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|