My 238C antenna switch has seemingly gone bonkers.
I connect one coax(antenna) to any of the four antenna connectors on
the rear of the unit
and when I switch from antenna 1 to 2 to 3 to 4, I get the same output
to the same single antenna when switched to any of the four positions.
Getting to the switch is a bear so I havent tried to see why the
switch is behaving as if all four positions are connected together.
Anyone had this problem before?
-----------------------------------------From: "Ken, W8EK"
To: "TenTec List at contesting"
Cc:
Sent: Wednesday November 22 2023 12:53:54PM
Subject: [TenTec] Need TenTec 238 Ant Tuner Parts
I am in need for some parts for the TenTec 238
(plain 238, and NOT 238 B) antenna tuner.
Hopefully some of you might be able to help.
Here is what I need:
Top cover (U shaped, covering top and both sides)
Plexiglass dial cover, goes along the top front,
with the dial markings on it.
Plastic end plates for the front corners
Knobs
Toroid balun
Or, does anyone have a parts unit that might have
these parts on it? All of my internal parts appear
to be fine (except balun). Maybe your internal
parts are dead.
Please let me know what you might have available.
Thanks.
73,
Ken, W8EK
Ken Simpson
E-mail to W8EK@FLHam.net or W8EK@arrl.net
Voice Phone (352) 732-8400
.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
/>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|