In a message dated 97-09-13 23:39:43 EDT, chestert@pressroom.com writes:
> >One of those projects will be to remove the 8 pin mike connector from my
>
> >Heil headset mike and replace it with the 4 pin variety.
>
>
> Don't be too disappointed when you plug in your Heil headset. Heil
headsets
> are designed to work with audio voltage type outputs like the Kenwoods.
Icom
> and TenTec radios do not drive the headphones with very loud audio.
>
Excuse me - I'm confused. My Omni VI drives the Heil headphones fine (and my
XYL
sez I'm getting hard of hearing!) About 8:00 to 8:30 position on the AF Gain
does the
trick. Just another opinion...
By the way, I built an "interface box" for the Heil mic plug to the radio,
and in limited
SSB work, it seems to work FB also. With my old rig, TT Delta, not enuf mic
drive
(different story.)
73's All,
Marty - W7LEJ (Spokane, WA)
ex K5GLC - QCWA - RCA
'79 BMW R65 - ONE of the other hobbies!
---------------------
Forwarded message:
From: chestert@pressroom.com (Chester Alderman)
Sender: owner-tentec@contesting.com
To: tentec@contesting.com
To: <tentec@contesting.com>
Date: 97-09-13 23:39:43 EDT
At 05:05 PM 9/13/97 -0500, you wrote:
>Hello all:
>
>I just ordered my first TenTec rig, the Omni VI+, and I'm trying to prepare
>my station accessories while waiting for the rig that hopefully represents
>a step up from my TS-850. Who knew that waiting would be so hard?
But it's gonna be worth the wait! I've had an Omni 6 for six years and just
got it converted to the Plus. Will be interesting to hear your opinion after
you have operated the radio for a few months.
>
>One of those projects will be to remove the 8 pin mike connector from my
>Heil headset mike and replace it with the 4 pin variety.
Don't be too disappointed when you plug in your Heil headset. Heil headsets
are designed to work with audio voltage type outputs like the Kenwoods. Icom
and TenTec radios do not drive the headphones with very loud audio.
>
>Could someone tell me what the assignments are for the 4 pin TenTec setup?
>And while I'm asking questions, will TenTec ship a DC power cord with the
>radio, or just a plug?
The pin connections for the micraphone are: Pin 1 = audio; Pin 2 = Ground;
Pin 3 = PTT; and Pin 4 = VDC. If you plan on using VOX only, then of course
you only need to hook up pins 1 and 2.
If you ordered the power supply, the DC cable and connector are an intergal
part of the power supply. Otherwise you just get a blank connector that fits
the back of the Omni.
BEWARE!!! YOU ARE ABOUT TO BECOME HOOKED BY TENTEC!!!
>Thanks!
>
>73, de Mike Pagel, K9UW
>Amherst, WI
>
>--
>FAQ on WWW: http://www.contesting.com/tentecfaq.htm
>Submissions: tentec@contesting.com
>Administrative requests: tentec-REQUEST@contesting.com
>Problems: owner-tentec@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
Chester Alderman
<color><param>0000,0000,ffff</param>W4BQF -- Tom
</color><color><param>ffff,0000,0000</param>chestert@pressroom.com
</color>
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|