TenTec
[Top] [All Lists]

[TenTec] Jupiter power issue

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: [TenTec] Jupiter power issue
From: Michael Goins <wmgoins@gmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 31 Jul 2010 13:00:49 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Putting the Jupiter station back together and I seem to have a problem.

When I hook the rig via the wattmeter to a dummy load and put the
internal Jupiter meter in "power" and key the rig, I show 20 watts,
regardless of where it is set on the power range in the Jupiter's
menu. When I am at 0 in the menu, I have 20 watts. At 50%, 20 watts.
At 100%, 20 watts. I am running the output through an external meter
to the dummy load, and the internal meter matches what the external
meter is showing.

I am new to the Jupiter, and I don't know if it's me missing something
or having something in the wrong position, or if I have a power output
issue, but it's got me worried.

Mike, k5wmg
Pipe Creek, Texas
Fast cars, slow boats, big dogs, old trucks, little radios, and
summers off to write
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>