TenTec
[Top] [All Lists]

Re: [TenTec] RF Ground

To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] RF Ground
From: "Bob McGraw - K4TAX" <RMcGraw@Blomand.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 6 Apr 2009 18:21:58 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Lifting the neutral or ground is a sure fire way to increase your funeral 
directors bank account.

73
Bob, K4TAX


----- Original Message ----- 
From: "Jim WA9YSD" <wa9ysd@yahoo.com>
To: <tentec@contesting.com>
Sent: Monday, April 06, 2009 5:21 PM
Subject: Re: [TenTec] RF Ground


> Jim Brown is right.
>
> One other current loop is the neutral.  I have know a person that 
> eliminated the neutral to eliminate that remaining current loop.  He used 
> the station ground as the return.  This is in violation of electrical code 
> of course and not recommended to do because of the electrical hazard.
>
> Like Jim has said before,  from the point where the coax shield from the 
> antenna start measuring your lengths of inter connecting cable to the 
> radio gear.  A 1/4 wave length will radiate.  You need to break that up. 
> Common mode chokes are the answer.
>
> Keep The Faith, Jim K9TF/WA9YSD
>
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>