I used a 1/4" to 1/8" adapter from Radio Shack for the headphone part and
made my own 1/8" to 8 pin DIN for the mike audio. I also included the
resistor and capacitor inside the DIN connector to provide polizaration
voltage for the mike element using 1/8 watt resistor 6.8K and a capacitor of
0.1 uF at 15VDC. It is a tight fit but works.
73
Bob, K4TAX
DISCLOSURE:
This is to inform all persons, I am a Tentec Ambassador and I receive
compensation according to the Tentec Ambassador program. In addition, I
serve as a volunteer beta test person to Tentec for the Omni VII, Eagle
and Argonaut VI radios. I hold no employment relationship, no financial
interests nor do I conduct any commercial business, direct or indirect,
with Tentec.
----- Original Message -----
From: "Kim Elmore" <cw_de_n5op@sbcglobal.net>
To: "Tentec Contesting List" <tentec@contesting.com>
Sent: Wednesday, March 27, 2013 9:19 PM
Subject: [TenTec] Computer Headset Secured -- Now What?
I have nabbed a remarkably cheap computer headset that is spoken of highly
by some on the list. It has the standard 3.5 mm stereo plugs, one for the
head set and one for the electret microphone. Does anyone have a
handy-dandy source for an adapter to an Orion II, or have one they've made
and really like or will I have to make my own?
73,
Kim N5OP
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|