If your Astron 35 amp supply is running too hot running an Eagle, better check
the current draw that your Eagle is pulling.
It’s POSSIBLE that the Eagle has an issue that is causing it to draw too much.
This could end up being very costly if you don’t correct it.
I use an RS-35 to run my Orion anti never even gets warm. The Eagle draws
nothing near what an Orion draws.
Gary
> On Sep 3, 2018, at 11:51 AM, John W. Farler <k4avx1@windstream.net> wrote:
>
> I'm using my Eagle with an Astron 35 amp analog supply. One already blew the
> diodes in the supply, but this one so far is OK. It gets pretty warm, and I
> don't particularly like Astron supplies. I'm thinking of using a model 962
> TT Supply with it. I really haven't checked the current on the radio and the
> 962 yet, but I'm assuming it should handle the radio ok, since it was used
> with an Omni V and then an Omni VI+ before they went down.
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|