Dave:
You cannot disable the relay via a menu on the 7300 although you can on the
IC-7610. The amplifier relay is keyed at all times.
The only way to kill the relay is to rip it out. Once it's out you just
connect it's driver to the amp key output and let the driver
transistor do the keying. Doing this is not for the faint of heart however.
I still have my Corsair II, Triton IV, Argo 6, Omni C and PM3A here.
On Fri, Jan 10, 2020 at 11:36 PM Dave Edwards <kd2e@comcast.net> wrote:
> It is 50 watts.
>
> Yes, I also thought that it is WAY behind the 7300 in almost all
> categories.
>
> In fact, it seems very much the same as my Ten Tec Argo V......but about
> 25 more watts.
>
> Priced competitively, I'd grab one! In my opinion, it needs to be
> about $499.00
>
> By the way...to disable the amp relay in the 7300...can you tell me what
> setting that is?
>
> ....Dave
>
> On 1/10/20 8:45 PM, Rodney Dewald via TenTec wrote:
> > What is the power output
> >
> > Sent from Mail for Windows 10
> >
> > From: Steve Ellington
> > Sent: Friday, January 10, 2020 8:21 PM
> > To: Discussion of Ten-Tec Equipment
> > Subject: Re: [TenTec] Classic TenTec QSK, etc.
> >
> > That RGO is pretty close to the price of an IC-7300. QSK is it's
> advantage
> > but that's about all.
> > I disabled and bypassed the amp relay in the 7300 and now QSK is quiet
> > bearable.
> >
> > On Fri, Jan 10, 2020 at 8:06 PM Dave Edwards <kd2e@comcast.net> wrote:
> >
> >> Yes, I know the rig Don....the post I replied to made it seem that the
> >> RGO is the soon to be released new Ten Tec. That is what seemed out of
> >> place.
> >>
> >> ....Dave
> >>
> >> On 1/10/20 6:34 PM, Don Rasmussen via TenTec wrote:
> >>> Dave,
> >>>
> >>> RGO is Bulgarian.
> >>>
> >>> RGO One is a retro superhet transceiver in the likeness of the classic
> >> Ten Tec's, but has IF output, PC control, and some other features that
> most
> >> newer transceivers now have.
> >>> de Wb8yqj Don
> >>>
> >>>
> >>> Re: [TenTec] Classic TenTec QSK, etc.
> >>> from [Dave Edwards] [Permanent Link] [Original]
> >>> To : Don Rasmussen via TenTec < tentec@contesting.com >
> >>> Subject : Re: [TenTec] Classic TenTec QSK, etc.
> >>> From : Dave Edwards < kd2e@comcast.net >
> >>> Reply-to : Discussion of Ten-Tec Equipment < tentec@contesting.com >
> >>> Date : Fri, 10 Jan 2020 16:21:02 -0500
> >>> List-post : < mailto:tentec@contesting.com >
> >>> The current RGO one is going to be Ten Tec?
> >>>
> >>> ....Dave
> >>> _______________________________________________
> >>> TenTec mailing list
> >>> TenTec@contesting.com
> >>> http://lists.contesting.com/mailman/listinfo/tentec
> >> _______________________________________________
> >> TenTec mailing list
> >> TenTec@contesting.com
> >> http://lists.contesting.com/mailman/listinfo/tentec
> >>
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|