TenTec
[Top] [All Lists]

Re: [TenTec] Omni-VI+, No Xmit on 15m & 17m

To: "mail@ecrites.com" <mail@ecrites.com>, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Omni-VI+, No Xmit on 15m & 17m
From: Carlos <carlos.peco@gmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 27 Apr 2019 00:45:24 -0400
List-post: <mailto:tentec@contesting.com>
Hi Jim,

Does the current consumption go up as you turn the power knob to the right?
I'm thinking of an issue in the LPF filter as Gary mentions.

73,
Carlos VK1EA


On Saturday, April 27, 2019, Jim C <1291jim@gmail.com> wrote:
> Here are the symptoms.  Thanks for your advice in advance!
>
>
>
> *       All is well except for 15 and 17
> *       On these bands, No transmit, but receive is fine
> *       No indication of power-out on rig meter or outboard watt-meter,
CW &
> SSB.
> *       CW Tone sounds normal until I increase the power dial to the 3pm
> position, about 70%, then the tone starts to flutter es Chirp.  But still
no
> power out.
>
>
>
> No other issues with the rig on all other bands.
>
>
>
> 73,
>
>
>
> Jim
>
> W6JIM
>
>
>
>
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>