I also would like a "Line Out" to behave like a "Line Out" should: fixed
level. Of course it would be great if that fixed level were adjustable by
software, but not affected by the volume controls.
73
Rick
-----Original Message-----
From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
On Behalf Of Martin AA6E
Sent: Sunday, January 23, 2005 9:50 AM
To: tentec@contesting.com
Subject: Re: [TenTec] Orion AUX out audio question
Tommy,
I've always felt like a beta tester, even with the released firmware!
You would have to be braver or bolder than I to be an actual beta
tester. Or did they give you a price break? ;-)
OK. I guess the question for this list is does anybody see ANY good
reason for the Aux Out to be treated in this complicated way? A bunch
of us seem to think that a straight, no questions asked line output is
what we want. We can all mail to ditsnbits, but it would be good to
understand the other point of view -- if there is one!
73, Martin AA6E
--- Tommy <aldermant@alltel.net> wrote:
> Hi Martin,
>
> This is strange. Just checked mine again. Put the audio menu Left =
> Sub and can vary the left aux output by using the SubRx AF control.
> Put Left = MAIN or BOTH and vary the MAIN AF output and the left aux
> output stays constant. With Left = MAIN or BOTH, changing SubRX AF
> has no affect on pin 3 of the AUX I/O!!
>
> Running 1.373 beta 5 so don't know if this is a new thing or not.
>
> But regardless, since its called 'line' audio output, AUX I/O pin 4
> and pin 6 audio output level actually should be completely
> independant of what you do with the AF controls for either receiver.
> It just does not work that way however!
>
> Tom - W4BQF
>
> ----- Original Message -----
> From: "Martin AA6E" <msembx-aa6e@yahoo.com>
> To: <tentec@contesting.com>
> Sent: Sunday, January 23, 2005 9:09 AM
> Subject: Re: [TenTec] Orion AUX out audio question
>
>
> > Tommy,
> >
> > My rig does not behave that way. Left=Sub produces constant
> > output
> > unless you zero out the Sub AF volume. (v 1.372) In that case the
> > aux.
> > output is blanked out.
> >
> > Thinking about this a little more, I think the TT logic is just
> > wrong
> > for my use. I want the aux. output to be completely independent
> > of
> > front panel level controls. That's what "line out" normally
> > means.
> > This could be fixed in firmware -- and/or made a menu option.
> >
> > 73, Martin AA6E
> >
> > --- Tommy <aldermant@alltel.net> wrote:
> >
> > ..however if you have
> >> LEFT set for SUB, you can vary the audio level at pin 4 using the
> >> SubRx AF control.
> >>
> >>
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|