Use care when spraying WD-40! When it dries, it makes a fine glue. I have
made several dollars cleaning Browning semi-auto shotguns the owner had
sprayed full of WD-40 and stuck the action.
73,
Frank K4VMO
----- Original Message -----
From: "Brian Carling" <bcarling@cfl.rr.com>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Monday, June 30, 2014 8:06 AM
Subject: Re: [TenTec] OT - Desk Microphone Switch Issue
5 !!
Spray WD40
Best regards - Bry Carling
On Jun 29, 2014, at 10:10 PM, K8JHR <jrichards@k8jhr.com> wrote:
I sometimes use a Shure 522 desk microphone with the rig. Unfortunately,
mine has a squeaky switch - and I have determined it is the switch,
itself, and not the plastic actuator button, etc.
So... should I :
1) just live with it applying the old adage: if you fix something long
enough - eventually you will break it... or
2) Apply a very small amount of De-Oxit or similar product to lubricate
it... or
3) order a new switch and stop being cheap... or
4) Fill in the blank ____________________________ or
5) None of the above.
Thanks.
--------------------------K8JHR ---------------------
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|