TenTec
[Top] [All Lists]

[TenTec] WTB: 262 PS

To: <tentec@contesting.com>
Subject: [TenTec] WTB: 262 PS
From: dufferjames@hotmail.com (James Duffer)
Date: Thu, 12 Jul 2001 09:45:00 -0500
I have had dealings with Astron before, by e-mail,I admit they are very slow 
to respond, in fact I gave up, but snail mail got good results.  The matter 
I had involved a correct schematic as the one I had was not complete (there 
were components on the board that wasn't on the schematic).  Try writing 
them.
73, Jim, wd4air


>From: "Duane Budd" <dcbudd@chartertn.net>
>Reply-To: <w5ben@arrl.net>
>To: "Mike Hyder -N4NT-" <N4NT@chartertn.net>, <wn3vaw@fyi.net>,   "Ten-Tec 
>Reflector" <tentec@contesting.com>
>Subject: RE: [TenTec] WTB:  262 PS
To: <tentec@contesting.com>
>Date: Thu, 12 Jul 2001 06:50:15 -0400
>
>
>I have an Astron switching p.s. that has squatted. Anyone
>know of a repair facility? Astron has ignored 5 or 6 emails
>requesting how to get the unit repair.
>
>
>Duane Budd
>w5ben@arrl.net
>
>-----Original Message-----
>From: owner-tentec@contesting.com
>[mailto:owner-tentec@contesting.com]On
>Behalf Of Mike Hyder -N4NT-
>Sent: Saturday, July 11, 1992 14:19 PM
>To: wn3vaw@fyi.net; Ten-Tec Reflector
>Subject: Re: [TenTec] WTB: 262 PS
>
>
>
>Be sure to ground the negative post of the Astron supply.
>The way I do it
>is to take the post out of the cabinet and remove the
>insulators.  Then I
>scrape the paint from around the hole on the inside of the
>cabinet and put a
>lockwasher on the inside as I am mounting the post in the
>cabinet without
>the insulators.  I saved my insulators in case I ever wanted
>to restore the
>supply to original.
>
>73, Mike -N4NT-
>
>----- Original Message -----
>From: <wn3vaw@fyi.net>
>To: <tentec@qth.net>
>Sent: Wednesday, July 11, 2001 8:44 AM
>Subject: [TenTec] WTB: 262 PS
>
>
> > I will soon, FedEx or UPS (gulp!) willing, be the owner of
>a Triton IV
>(540 Analog).  It was a great deal, but one thing is
>missing:  the matching
>AC Power Supply.
> >
> > Anyone on the list have one that they're willing to part
>with?  Please let
>me know price, condition & availability.
> >
> > In the meantime, my Astron RS20A will suit it just fine...
>it's not a
>requirement to have the matching supply, it would just be
>nice.
> >
> > Thanks!
> >
> > 73, ron wn3vaw
>
>
>
>--
>FAQ on WWW:
>http://www.contesting.com/FAQ/tentec
>Submissions:              tentec@contesting.com
>Administrative requests:  tentec-REQUEST@contesting.com
>Problems:                 owner-tentec@contesting.com
>
>
>
>
>--
>FAQ on WWW:               http://www.contesting.com/FAQ/tentec
>Submissions:              tentec@contesting.com
>Administrative requests:  tentec-REQUEST@contesting.com
>Problems:                 owner-tentec@contesting.com
>

_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com


--
FAQ on WWW:               http://www.contesting.com/FAQ/tentec
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com


<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] WTB: 262 PS, James Duffer <=