Hi Tim,
Well unless (like me...) you live in Europe, with all the multi-kW broadcast
on 7.100 MHz and up, you will not notice it at all.
The phase-noise values are important if you use the rig as IF to
UHF/Microwaves, but I think the Omni-VI+ is having comparable phasenoise to
the K2?
73, Dick/PA2DWH
-----Oorspronkelijk bericht-----
Van: tentec-bounces@contesting.com
[mailto:tentec-bounces@contesting.com]Namens tlogan7@cox.net
Verzonden: maandag 10 februari 2003 15:53
Aan: tentec@contesting.com
Onderwerp: [TenTec] K2/Omni VI+ Ip3,Ip2,BDR 5 & 20 kHz
Folks -
In the real world outside the laboratory what are the following differences
truly going to mean to me? What might I actually experience that would be
extremely obvious to me? They are from the Elecraft website.
Omni VI+ K2
Ip3 +12 +21.6
Ip2 58 76
BDR 5kHz 86 88
BDR 20kHz 123 136
Do these differences truly have significance that can be heard outside the
lab? Thanks 73/Tim NZ7C
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|