TenTec
[Top] [All Lists]

[TenTec] Jupiter / Peg Ext. Spkr. Isolation Mod.

To: tentec@contesting.com
Subject: [TenTec] Jupiter / Peg Ext. Spkr. Isolation Mod.
From: N0KHQ@aol.com
Reply-to: tentec@contesting.com
Date: Mon, 16 Feb 2004 16:47:05 EST
List-post: <mailto:tentec@contesting.com>
For those of you that are interested.

Aux. DSP units may be used with the addition of an isolation transformer.

Mark (N8ME) suggested using RS transformer 32-1031B, these units are no 
longer available.

A replacement transformer from Electronics Plus Inc. (415) 457-0466 will work 
just fine.
The part no. is LM25-10 cost is $7.95 + shipping they are a tad smaller than 
the RS model.

>From the rig ext. spkr connect to the (c) and (8) ohm side of the secondary. 
>From the primary side connect to (c) and (10) watts to you favorite DSP unit 
input and enjoy.

Been running mine for a week works great. NO SMOKE!

73
John / N0KHQ / St. Louis

Always on 18.130

Antennas:

You can build 'em better than you can buy 'em
Please visit the sites below:
http://www.hamuniverse.com/17mcoaxmox.html
http://www.cebik.com/n0khq.html
http://www.ssb-audio.com/forum/
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] Jupiter / Peg Ext. Spkr. Isolation Mod., N0KHQ <=