Claudio,
First things to check...
(I have a older MicroHam MicroKeyer, not a Keyer 2.)
1. You are using the Microham Router software?
A. And have the [Menu] [Audio Switching] [VOICE] set to "CBA"?
(The special setting to send the audio to the ORION II rear mic input.)
B. and the [Menu] [Audio Switching] [VOICE/DIGITAL] set to VOICE?
2. On the Orion II,
A. [Menu][SSB][TX Audio Source] set to AUX?
B. [Menu][SSB][Aux Input Gain] set to some reasonable value, ~30?
(Interacts with MK "to Radio" gain, and PC audio out gain.)
[I have a separate problem of a very local 35KW BC station getting into
the Orion II via the front/rear mic inputs, but I can make FT8 contacts.)
Bob, w3idt
.......
. Robert F. Teitel, W3IDT
.
. w3idt@comcast.net
. w3idt@arrl.net
........
On 1/28/2022 1:55 PM, claudio gimenez wrote:
Hi guys
I'm egg here
I bought a TEC TEC Orion II and I can't operate on FT8, I have a
microham Keyer II and the corresponding cable, I've tried to do it
through the back of the radio and through Mike's input without success.
JTDX accepts normal CAT, normal PTT, I just can't transfer the carrier
since this radio doesn't have USB-D, as well as my Kenwood
I appreciate who can send the config here or in the PVT
73
Claudio PY2KP
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|