TenTec
[Top] [All Lists]

Re: [TenTec] Omni VII, Antenna tuning, etc.

To: kd3jf@arrl.net,Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Omni VII, Antenna tuning, etc.
From: Clark Savage Turner <csturner@kcbx.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Thu, 13 Sep 2007 07:30:36 -0700
List-post: <mailto:tentec@contesting.com>
Oh, heck, I've beaten up a Dentron Super Tuner on 160 with my OMNI VI 
and no amp at all.  100 watts into a short vertical - it DID get the 
SWR down at the rig but the SWR would "creep up" with heating of the 
elements inside.  I tried another one, same thing.  I suspect many of 
the MFJ units would do the same.  Their cheaper tuners are "fine" as 
long as your antenna is relatively well behaved (I've done fine with 
the Diff-T tuner from MFJ even with an amplifier, but never a difficult 
antenna!)

Yes, then I went to the 238 and it worked fine.  Now, I don't use amps 
anymore, and my main tuner is the Harvey-Wells Z match, rated for 400 
watts (AM!!!) and just hit it with 5 watts most of the time.  No 
problems here.

Clark
WA3JPG

On Sep 13, 2007, at 6:55 AM, Paul Gates, KD3JF wrote:

> I also had a Dentron tuner. I think it was called Super Tuner.... 
> rated for a kilowatt and never had a problem... So what Bob McGraw is 
> talking about must not be Dentron or MFJ!! <g>
>
> "Carter, K8VT" <k8vt@ameritech.net> wrote: Bob McGraw - K4TAX wrote:
>
>>  I noticed "smoke coming out of the box".  I opened it up to discover
>>  the tapped inductor and it's plastic structural supports to be stinky
>>  gooey brown limp bars.  Fortunately the stiffness of the wire held
>>  things in reasonable shape.  Although the tuner didn't arc or
>>  flash-over, as far as a 1.5KW PEP power rating, it isn't. {Name
>>  omitted to protect the guilty.}
>
> I hope you have some mighty fine justification to "protect the
> guilty".   ;-)

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>