> Message: 5
> Date: Thu, 09 Jun 2011 21:59:30 -0400
> From: "Tom Stone" <sail8@verizon.net>
> Subject: [TenTec] Omni VI+ Frequency Display Problem Only On LSB
> To: <TenTec@contesting.com>
> Message-ID: <000501cc2712$09890110$1c9b0330$@net>
> Content-Type: text/plain; charset="us-ascii"
>
> Has any owner of an Omni VI+ ever had a problem similar to this? (With the
> RIT off, Identical Side tone and Pass Band Tuning set at zero on both
> rigs)
> 160M - LSB - Orion II 1.900.000 For the same voice quality (sounds the
> same)
> the Omni had to be tuned to 1.899.75
I believe I have a similar issue, but notice it mostly on USB.
I find the most pleasing audio at .85 most of the time.
As was mentioned, it's not a huge deal, given there is no rule that one
should park the VFO at ".00" or ".50" or .25/75 on the dial, but it's
somewhat annoying (and my Paragon II didn't exhibit this characteristic,
but also sports a wider filter choice) and most operators DO sit on an
even frequency simply because the modern rigs let us.
I guess I'll be looking at the manual a bit more this weekend and maybe I
can bring it back to alignment.
-Tom
ke7vux
Paragon II (blown ALC from static)
Omni VI+
Scout
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|