On 9/13/97 10:45 AM, Thomas M. Delker at k1ky@bellsouth.net wrote:
>Has anyone interfaced aviation headsets requiring power to the mic to an
>Omni 6 or related radio?? Seems the mic element will need power as it
>is the amplified type.
>
>I have a David Clark model with amplified mic element.
The problem with all aviation headset is *NOT* that they are amplified.
Aviation headsets used to be all carbon microphones, which require a bias
current in order to work. All subsequent headsets are been designed to be
compatable, whether they use carbon microphones or not.
Tie the one microphone lead to +12 through a 2.2 kiloohm resistor. Tap
off the audio using a capacitor of around 1 uF. That should do it.
Bill Coleman, AA4LR, PP-ASEL Mail: aa4lr@radio.org
Quote: "Not in a thousand years will man ever fly!"
-- Wilbur Wright, 1901
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|