I would think that IMD products in a high-level PA that is over-driven
beyond good linearity limits could add some junk in the "undesired
sideband"? FWIW
Charlie, K4OTV
-----Original Message-----
From: Topband [mailto:topband-bounces@contesting.com] On Behalf Of Joe
Subich, W4TV
Sent: Monday, December 30, 2013 6:05 PM
To: topband@contesting.com
Subject: Re: Topband: Digital mode spurious issues
> Does the Joe Taylor software have a provision for this?
No, Joe Taylor's protocols are not capable of operating in LSB.
73,
... Joe, W4TV
On 12/30/2013 5:59 PM, Richard (Rick) Karlquist wrote:
> The simplest technical solution would be for the digital mode users to
> put the radio in LSB mode.
> This puts unwanted sideband QRM away from the DX CW window. Does the
> Joe Taylor software have a provision for this?
>
> Rick N6RK
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
>
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|