Topband
[Top] [All Lists]

Re: Topband: Ethernet control switching of HI-Z 4-8 Pro System

To: <topband@contesting.com>
Subject: Re: Topband: Ethernet control switching of HI-Z 4-8 Pro System
From: "Sam Harner" <wt3q@comcast.net>
Date: Mon, 12 Sep 2016 18:08:47 -0400
List-post: <topband@contesting.com">mailto:topband@contesting.com>
am I the only one getting doubles of every message ??? sorry for the silly
question but no one else has mentioned it     Sam

-----Original Message-----
From: Topband [mailto:topband-bounces@contesting.com] On Behalf Of Herbert
Schoenbohm
Sent: Monday, September 12, 2016 5:01 PM
To: topband@contesting.com
Subject: Re: Topband: Ethernet control switching of HI-Z 4-8 Pro System

You might consider an IP-Power unit. The provide both LAN and WAN control.
Each output can be selected and provides 120 VAC to outputs via standard AC
socket.  I convert this at the socked with a DC wall wart and us it to
switch Beverages remotely with a simple on screen selection box.  The item
switched can be labeled accordingly. The units sell on eBay for about $120
and comes with software and tools to install.  The other alternative is
Remote Rig box and IP Switch, but this is a lot more money.



On 9/12/2016 12:59 PM, Larry - K1UO wrote:
> Boxbe <https://www.boxbe.com/overview> This message is eligible for 
> Automatic Cleanup! (k1uo@tds.net) Add cleanup rule 
> <https://www.boxbe.com/popup?url=https%3A%2F%2Fwww.boxbe.com%2Fcleanup
> %3Fkey%3DuZtM6ksWTn1pOdpNPN0psWoyzGuDl68N70y911CCxK4%253D%26token%3DaZ
> 6vZx%252BHlGJcJ6lyWnfYXdzzskkf8uUPwTcNeOvtIxE8UMnzzSNj8M0ZXbLRkUe4miAN
> Bf8tXAu%252BQ8Ae5qANn4V1l17ERzBr4cO4NRAU8mrbuoVbQIWZvsX%252FTLHlLWlh&t
> c_serial=26766479394&tc_rand=646335648&utm_source=stf&utm_medium=email
> &utm_campaign=ANNO_CLEANUP_ADD&utm_content=001>
> | More info
> <http://blog.boxbe.com/general/boxbe-automatic-cleanup?tc_serial=26766
> 479394&tc_rand=646335648&utm_source=stf&utm_medium=email&utm_campaign=
> ANNO_CLEANUP_ADD&utm_content=001>
>
>
>
> Is anyone on here controlling their HI-Z 4-8 Pro (or similar) remotely 
> over an Ethernet or VPN connection?  If so, what equipment are you 
> utilizing to do this?  I am trying to eliminate controlling remotely 
> via a USB connection at the remote location PC using Teamviewer.
>
> Thanks for any suggestions
> Larry  K1UO
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband

_________________
Topband Reflector Archives - http://www.contesting.com/_topband


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

_________________
Topband Reflector Archives - http://www.contesting.com/_topband

<Prev in Thread] Current Thread [Next in Thread>