Topband
[Top] [All Lists]

Re: Topband: Short Loaded Beverages

To: "Dennis W0JX" <w0jx@yahoo.com>, <topband@contesting.com>
Subject: Re: Topband: Short Loaded Beverages
From: "ZR" <zr@jeremy.mv.com>
Date: Sun, 23 Jan 2011 21:53:30 -0500
List-post: <topband@contesting.com">mailto:topband@contesting.com>
Im still in favor of Slinkys for a short antenna. Rust prevention is an 
issue or use the brass version for more money.

Now that I have the 4 long 2 wire versions up and running well the next step 
will be trying phased end fire Slinkys....in the spring.

Carl
KM1H


----- Original Message ----- 
From: "Dennis W0JX" <w0jx@yahoo.com>
To: <topband@contesting.com>
Sent: Sunday, January 23, 2011 3:27 PM
Subject: Topband: Short Loaded Beverages


There is too little written about the usability of short beverages. During 
this recent discussion, no one has mentioned the use of the inductance 
loaded beverage as described in ON4UN's book and also written about by W8JI.

Although they become single band RX antennas, the use of loading inductance 
placed appropriately in the antenna run can produced a useful beverage 
antenna pattern with a relatively short wire.

73, Dennis W0JX



_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK 

_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK

<Prev in Thread] Current Thread [Next in Thread>