| To: | topband <topband@contesting.com> |
|---|---|
| Subject: | Re: Topband: BCB Filter Recommendation? |
| From: | Jeremy Maris <jeremy@maris.plus.com> |
| Date: | Thu, 16 Apr 2020 23:31:52 +0100 |
| List-post: | <mailto:topband@contesting.com> |
Here’s a link to the values I used, seeing as it doesn’t get through the reflector. http://www.g4aqg.sussex.ac.uk/9-pole-chebyshev-1500-exactvalues.tiff Built in an evening in a diecast box with BNC sockets, dead bug construction on single sided PCB and copper foil screening between sections. Jeremy > On 16 Apr 2020, at 22:45, Jeremy Maris <jeremy@maris.plus.com> wrote: > > Make your own! Jeremy Maris G3XDK / G4AQG _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector |
| Previous by Date: | Re: Topband: BCB Filter Recommendation?, donovanf |
|---|---|
| Next by Date: | Topband: Topband Contester W3YOZ / W3SO Silent Key, donovanf |
| Previous by Thread: | Re: Topband: BCB Filter Recommendation?, Jeremy Maris |
| Next by Thread: | Re: Topband: BCB Filter Recommendation?, Richard (Rick) Karlquist |
| Indexes: | [Date] [Thread] [Top] [All Lists] |