Topband: Ground connection for series-connected RG-400/#31 common-mode chokes

[N4ZR <n4zr@comcast.net>]

I've just finished winding two 17-turn RG-400 common mode chokes on #31 
cores.  My thought is to series-connect these for adequate power 
handling at the base of an inverted L on 160M.
My question is, where in this lash-up do I connect the shield of the 
RG-400 to the ground radial system - at the SO-239 where the feedline 
comes into the box (before the chokes) , or at the end of the second 
choke that connects to the inverted L, or ???
--
73, Pete N4ZR
Check out the new Reverse Beacon Network
web server at <http://beta.reversebeacon.net>.
For spots, please use your favorite
"retail" DX cluster.

_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector