I'm going to be SLOWLY trying to improve my never to be better
than poor ground radial system, I have about 3000 feet of teflon covered
24 gauge wire that I thought I'd use for the radials since the wire is
too small
to be used for much anything else. My question is, is this too small a
wire
gauge to use for radials, or doesn't the wire gauge make much difference?
I can get about 3 radials out to about 120 feet, but all the rest can
only be
50 to 70 feet long, I plan on burying them about 2-3" in the ground, and
will have
about 20 or so when I'm done.
Mark WB8JKR
___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]
--
FAQ on WWW: http://www.contesting.com/topband.html
Submissions: topband@contesting.com
Administrative requests: topband-REQUEST@contesting.com
Problems: owner-topband@contesting.com
|