VK6VZ:
>I was very interested to see that the close spacing of 6" to 12" apparently
>(i.e. modelled on EZNEC) caused less interaction with parallel-fed
>inverted-Ls than spacing them 3' to 10'.
A cautionary note - NEC-2/EZNEC can give unreliable results when wires are
close together (in WL). In my models of the Force 12 C-3, for example, as
well as the factory's, the feedpoint values are 'way off. I think this is
a case where the ony reliable way is to give it a try.
73, Pete N4ZR
Contesting is!
The World Contest Station Database
is waiting for your input at
http://www.qsl.net/n4zr
--
FAQ on WWW: http://www.contesting.com/FAQ/topband
Submissions: topband@contesting.com
Administrative requests: topband-REQUEST@contesting.com
Problems: owner-topband@contesting.com
|