I have a 1000 ft bi-directional beverage that is built with RG-6 with
steel messenger wire. The wire seems to have no electrical effect but
makes the beverage really strong. A transformer at the far end puts the
reverse-direction signal between the center conductor and shield. 2
feedlines are used, each with a transformer. I just copied a design
that is out there.
On 1/9/2018 10:06 PM, terry burge wrote:
Hello Guys,
I have been give a bunch of CATV RG-6 coax like the cable company uses. I would
like to know if the coax with a solid support (messenger) wire will work
alright for building beverages? It almost looks like it could be use for
building a bi-directional beverage utilizing the coax shield for one direction
and the insulated support wire for the opposite direction. Anyone have some
experience with this? I have also thought of trying in as a BOG beverage.
Terry
KI7M
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|