Im in the wrong business!
Carl
KM1H
Have a look on ebay - rx splitter .
http://www.ebay.com/itm/ANTENNA-SPLITTER-COMBINER-RX-HF-1-50-MHz-SO-239-conn
ectors-/321217220222?pt=US_Radio_Comm_Antennas&hash=item4aca09ce7e
On 3/13/2014 9:13 PM, Gary K9GS wrote:
Can anyone point me to a design for a splitter for sharing a Beverage
antenna between two receivers? This is for Field Day so these are not
optimized Beverages by any means.
Just want to allow the 80/40M stations to share antennas. Nothing
fancy.
My thoughts are to just use a CATV "2-Way" splitter at the output of
the
Beverage matching transformer and run separate feed-lines to each
radio.
I'm pretty sure these things work down to 1 MHz but have not measured
them. I can use the pre-amp in the radio (K3) to compensate for the
loss.
Thoughts?
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4336 / Virus Database: 3722/7201 - Release Date: 03/16/14
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|