AD5VJ Bob wrote:
> I just installed 250' of #18 gauge wire in a straight line NE and SW. I went
> to the reflector to look up 'short beverage' and came
> up with only people talking about 580' beverages.
>
> Is there anything that can be done closer to 250' for a beverage. I have a
> preamp and would like it to work in both directions.
>
> I am thinking I connect the coax center to the wire and the braid to a ground
> stake at the end closest to the shack (the NE end).
>
>
>
> 73 fer nw es gud DX,
> QSL VIA: LotW, BUR, e-QSL
> Bob AD5VJ
> http://www.ad5vj.com/
> Old Calls WB5ZQU, WY5L/KH3, KE5CTY, N5IET
>
>
> _______________________________________________
> Topband mailing list
> Topband@contesting.com
> http://lists.contesting.com/mailman/listinfo/topband
Bob,
Google beverage antenna and you will come up with a wealth of info.
Short is OK but you still have to match its impedance and, if I read
your post correctly, there are a few steps you will need to take to get
it bi directional. See ON4UN's Low Band DXing, Vic Misek's Beverage
Handbook and read W8JI's web site. There are many other references to check.
GL,
Les W2LK
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|