Thanks very much Frank!
73,
Jorge
-----Mensaje original-----
De: donovanf@starpower.net [mailto:donovanf@starpower.net]
Enviado el: lunes, 28 de septiembre de 2015 12:16 p.m.
Para: Jorge Diez - CX6VM
CC: 'TopBand List'
Asunto: Re: Topband: radial plate height
Hi Jorge,
one degree of phase on 160 meters is 18 inches. Any dimension less
than 18 inches will have no significant affect on 160 meters. Your
ground platew will work perfectly at 5 inches high
73
Frank
W3LPL
----- Original Message -----
From: Jorge Diez - CX6VM <cx6vm.jorge@gmail.com>
To: 'TopBand List' <topband@contesting.com>
Sent: Mon, 28 Sep 2015 11:07:09 -0400 (EDT)
Subject: Topband: radial plate height
Hello
I am installing a DXE radial plate in the base of a vertical.
My doubt is if the heigh affect in something the performance.
I have it at 5 inches from ground, easy to work with it installing the radials
on the plate with nuts and bolts
Is any problem? It must be lower near the ground or not problem to have it at 5
inches from ground?
Thanks,
Jorge
CX6VM/CW5W
---
El software de antivirus Avast ha analizado este correo electr nico en busca de
virus.
https://www.avast.com/antivirus
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
---
El software de antivirus Avast ha analizado este correo electrónico en busca de
virus.
https://www.avast.com/antivirus
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|