One word of caution.
Don't put the radials too far under the surface. 2, 3, 4, or 5 inches
down is too deep! Remember that you will be cooking the soil (
introducing losses ) between the radial wires and the surface.
Try to keep the radial wires an inch or less below the surface.
73
Lloyd - N9LB
On Tue, Dec 9, 2014 at 7:45 AM, Jorge Diez - CX6VM wrote:
Hello
I think there´s a tool to make a line in the ground to put radials.
Couldn´t find it in website, don´t know the name in English
Could you please help me to find it or send me close up photos of
yours to
try to ask someone locally to make one?
Thanks in advance
73,
Jorge
CX6VM/CW5W
---
Este mensaje no contiene virus ni malware porque la protección de
avast! Antivirus está activa.
http://www.avast.com
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|