Mike
Most everyone will tell you it doesn't matter! That said, it doesn't hurt
,so I do it (I've modeled it too, but am more interested in results than
modeling).
Apparently it's hurting you and maybe the deer as well :) I very much doubt
that you'll notice a difference if you remove the taper, and I would
recommend it.
73
Ted KT1V
Demopoulos Associates, www.demop.com
Aligning Information Technology with Business Objectives.
At 10:39 AM 10/4/2004, you wrote:
Recently I saw some comments, referenced particularly to two wire
Beverages and about not tapering the last 60 feet or so to ground at each
end. I thought I read something also, that a single wire beverage does not
need to be tapered down at the ends. I always thought that they must taper
down.
Which is correct for a single wire Beverage?
I have heck with deer tearing down my feed-end taper it seems like
everyday. It must be right across their trail even thought it is mowed grass?
Thanks in advance for any/all comments.
Mike Bragassa, K5UO
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|