Hi everyone,
I'd like to take up a little of your bandwidth if I may,
This is just a reminder of our up and coming VK4XQA operation on 160M & 80M
that is scheduled for 19/20/21 November 2011 from Euramo, QLD, Australia.
All systems are go here, the antenna is ready, the rig and amplifier is ready,
now we wait until we can all congregate at the site.
Our operation times and frequencies will be fairly flexible mainly during our
nights here with prime consideration being given to top band operations.
Top Band Operations:
We will have one operator (John - VK4TL) who will be our designated CW operator
and who will be operating in the CW section of the band, somewhere around
1825KHz.
Our SSB operators will be myself, Jeff - VK4BOF and Gary - VK4FD (who may also
grace us with his CW skills), Chris VK4YCG will also be operating on occasion,
mainly on AM for the old time operators out there. <Grin>
SSB and AM operations will be on or about 1845KHz though we can go lower for
those of you out there that are not permitted operations in that section of the
band.
These frequencies comply with the suggested band plan here in Australia and
also seem to be ok for IARU region's 1 & 2 as well.
Please bare in mind that we will only be operating with ONE RADIO, therefore we
cannot devote all our time to just CW or just to the AM/SSB side of it, we must
share it aound amongst all modes and operators.
80M band Operations:
Please be aware that our 80M band operations are secondary to our 160M band
efforts.
SSB & CW Operation on 80M will be within the frequency range of 3779KHz to
3799KHz. (AKA, the 'DX Window' here in Australia.)
We *may* operate at a lower frequency (ie: between 3500 & 3700KHz) but it will
be a much lower priority.
In fact our whole 80M band activation is going to be of a lower priority for
us, we are mainly going to be on-site for 160M band operations.
Power output on all modes and frequencies will be the Australian legal limit
for the appropriate mode.
The rig will be an Elecraft K3 and the amplifier will be an Elecraft KPA500.
An Elecraft P3 Panadaptor will also be in use to see the activity around us on
the bands.
A short note on our callsign, VK4XQA.
In 1914 a man by the name of Marcus Brims applied for and received the first
experimental radio licence in Queensland, Australia.
Marcus lived in the township of Mareeba in Far North Queensland and he was
interested in and got a licence for operations for frequencies not too far
removed from the present 160m band and we thought that to honour him and his
pioneering work we should get and use the modern equivalant of his original
callsign for this 160M operation.
His callsign? Why XQA of course. (Meaning Q for Queensland, X for Experimental
& A being the first licence issued.)
Our club (T.R.E.C.) has assisted some of its members to help cosmetically
restore Marcus' original Spark Gap transmitter and it now has pride of place at
the Mareeba Heritage Centre.
Further information on the XQA exhibit is here:
http://treclub.org.au/index_htm_files/TREC%20NEWS%20June%202011%20Vol%204%20-%206.pdf
The Mareeba Heritage Centre has a website here:
http://www.mareebaheritagecentre.com.au/index.htm
We as a club are all looking forward to our little 'DXpedition' as this whole
'Top Band' thing is a new one for all of us.
Thanks for sparing me a little of your bandwidth,
73 de
Jeff Cochrane - VK4BOF
East Innisfail
QLD, Australia
Vice President - Tablelands Radio & Electronics Club Inc. (T.R.E.C.)
http://treclub.org.au
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
|