HI ALL
Our QTH at OM0M islimited in space and there is not room for extended phased
beverage systems.
I am trying my best to build system with RDF well over 14dBon limited space QTH.
(Kill the side lobs and your RX will love you too.)
W1FV-9 circle for 4 directions as well as linear 4el inlinesystem for USA were
built in field day styleprior the CQ 160.
Well done, but how to connect the hamshack with RX HUB?
Single RG6 and CAT5E FTP cable were directly buried undersurrounding road
in past.
Initial design - RG6 for RF and CAT5E for relay control isnot sufficient nova
day.
No cable duct = no way to extend anything.
The only chance is to use the unoccupied 100 Ohms pairs inCAT5E to carry RF
too.
CQ WW 160 was the best chance to test RX systems in toughcontest conditions.
Technicaldetails on enclosed google disk file:
PDF :
https://drive.google.com/file/d/1gTtywxB_sgZYRfgy42YB9wCTE9RqV3Cr/view?usp=sharing
Eznec for 9CC:
https://drive.google.com/file/d/1idf6JsQ32UrEQNs_7yc3hrrMWKT77DQH/view?usp=sharing
Eznec for 4el:
https://drive.google.com/file/d/19E_VXwYVG1HiDWNU9yybygsKPt0yjeKY/view?usp=sharing
VY73 DX
BelaOM8AW
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|