Topband
[Top] [All Lists]

Re: Topband: Voltage at top of vertical and scaling?

To: Jim Miller <jim@jtmiller.com>
Subject: Re: Topband: Voltage at top of vertical and scaling?
From: HP <pfizenmayer@q.com>
Date: Tue, 16 Apr 2019 19:52:24 -0400 (EDT)
List-post: <mailto:topband@contesting.com>
Just for grins - did a EZNEC free space - perfect ground - with 80 m vertical 
of #12 wire resonant at 3.55 mhz 
then put another #12 quarter wave resonant wire at right angles to the top thru 
1 megohm -1500 watts in to the vert 
(says its 36.42 + j 0 at source ) says there is 3042 volts at angle -92.56 deg 
across the 1 meg resistor . 

If go to 10 megs it says 3051 at -93.6 deg and base goes to 36.23 +J 0.02 

at 10K its says 1245 v at -29.7 deg and base goes to 41.62 + J 8.2 

FWIW and grins -- 

Hank K7HP 

----- On Apr 16, 2019, at 6:38 AM, Jim Miller <jim@jtmiller.com> wrote: 

| Is there any data on what the voltage might be at the top of a full size
| 80m vertical at 1500w input?

| Is there some zener like ionization at the top that limits the voltage?

| If so is there a way to estimate the voltage at lower points along the
| vertical? I assume the scaling wouldn't be linear since starting at the
| bottom on 36 ohms (sorta) and going to "infinity" at the top would preclude
| that.

| Thanks

| jim ab3cv
| _________________
| Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector

<Prev in Thread] Current Thread [Next in Thread>