Hello Ozer,
The following situation were simulated on MMANA:
Vertical part = 18m;
slopping part from 18m to 32m = 21m segment;
radials = 32pcs;
Results:
Z = 28 / -j32 Ohm
G = 2.71 dBi
Elevation angle = 23 degrees
Radiation pattern more like as an vertical.
The same INV. L but with the 21m section horizontally will have:
Z = 16.8 / 50.5 Ohm
G = 2.98dBi
Elevation angle = 24 degees
Radiation pattern with less deep null on the zenith.
An INV. L with 18m vertical and 21m slopping down to 9m will be:
Z = 10.7 / 67 Ohm
G = 3.03dBi
Elevation angle = 22 degrees
Radiation pattern almost the same as the previous INV. L.
For me, the best solution will be with not too much vertical section and a
slopping down horizontal section.
Hope this will help you.
73 de YO3FFF
Cristi
"ta2rc@superonline.com" <ta2rc@superonline.com> wrote: Hello all!
I have a question:
If I use the horizontal part of inverted L as slooping to up,(for
example:18 m vertical part and 21 m slooper part to up)what happens?
Any experience?
Thanks and 73!
Ozer TA2RC,YM0T
--------------------------------------------------------------------
mail2web LIVE ? Free email based on Microsoft® Exchange technology -
http://link.mail2web.com/LIVE
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
---------------------------------
It's here! Your new message!
Get new email alerts with the free Yahoo! Toolbar.
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|