Re: Topband: How Increase 160m power on FL2100z

["Tom W8JI" <w8ji@w8ji.com>]

If he gives the plate current and grid current compared to other bands, it 
will answer all questions all at one time.  :)

----- Original Message ----- 
From: "Herb Schoenbohm" <herbs@vitelcom.net>
To: <topband@contesting.com>
Sent: Sunday, April 20, 2014 10:19 AM
Subject: Re: Topband: How Increase 160m power on FL2100z


> Is the input circuit properly matched?
>
>
> Herb Schenbohm, KV4FZ
>
>
>
> On 4/19/2014 7:47 PM, Tom W8JI wrote:
> > > I think we must do something on the anode coil for better Q or add some
> > > length, change diameter?.. or other things ..?!
> > The only real tank circuit  issue is range of the tank components used to 
> > adjust the matching. Some amplifiers run outside optimum capacitor 
> > adjustment ranges.
> > Are any of the capacitors bottomed out? Is the load all the way at full 
> > mesh? What is the grid and plate current compared to other bands?
> >
> >
> > _________________
> > Topband Reflector Archives - http://www.contesting.com/_topband
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2014.0.4355 / Virus Database: 3882/7369 - Release Date: 04/20/14
_________________
Topband Reflector Archives - http://www.contesting.com/_topband