Put the rope inside a soft rubber hose like an automotive heater hose.
It won't hurt the tree or the rope.
----- Original Message -----
From: "Tracey Gardner" <tracey.gardner@talktalk.net>
To: <topband@contesting.com>
Sent: Sunday, January 25, 2015 1:10 PM
Subject: Topband: Non-Invasive tree attachment?
I'm replacing my Beverage and want to tension the wire at the far end by
fixing it to a low horizontal branch of a large old willow tree.
The branch in question is substantial and about 9 inches in diameter.
I don't want to fix into the tree as it is not my tree.
Can anybody suggest a suitable non-invasive means of making an attachment?
Many thanks
Tracey G5VU
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4800 / Virus Database: 4257/8997 - Release Date: 01/25/15
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|