Re: Topband: Radial Question

[Gary and Kathleen Pearse <pearse@gci.net>]

I’d run a test wire under the house and connect it to the rig. Listen for 
noise. Then connect to house ground and see if noisy. Compare that with each 
existing elevated radial for QRN. 

Here in Fairbanks anything through the home or grounded to the house or tower 
on 160 is worse than my ungrounded elevated radials. One elevated radial (of 8) 
near the power line is the noisiest. I disconnect it when it gets bad.

73, Gary NL7Y
_________________
Topband Reflector Archives - http://www.contesting.com/_topband