The best improvement will be with a second vertical for a phased array.
Second best will be a higher vertical.
Making it shorter is a bad idea.
73
Peter
-----Original Message-----
From: Topband [mailto:topband-bounces@contesting.com] On Behalf Of
dl8yhrfrank--- via Topband
Sent: Freitag, 5. Juni 2015 20:35
To: topband@contesting.com
Subject: Topband: 160m 27,5m vertikal titanex ore 22m toploaded?
Hi all
im running a 27,5m high titanex v160hd.....looking out for improvments..
radialfield is out of 100+radials between 5 and 20m long..
think about 3 options
1 ?? keep it as it is
2 ?? make it shorter arround 22m and set 2 10m long wires ore??? ? ? ?? ???
??? ? maybe? 15 m? 45 degrees down as top load
3?? take? the 2 upper sections of the titanex away and fix a 8m?
? ?? spiderbeam pole inside? so i will get a total high of 32m
ore maybe a shorted delta loop matched with a coil in resonance?
My sapce is vy limited here in the village and maybe someone has tested
differend setups in practice...anny infos vy welcome
i saw many simulations in the web but i like more to get a info from?
someone who tryed realy and know the result real..
best 73
Frank
DL8YHR
???????????
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|