Rick, my application is for an in-band RX antenna, but on a higher band. I just
thought the guys here might know more about the NCC-2, MFJ or QRM eliminator
than most others.
One thought was to create a 2 ele phased vertical array for the RX antenna with
a known pattern and put the null towards the TX array, along with physical
separation to allow in-band receiving.
But I was thinking an adjustable phasing system may produce a better null. But
I wouldn’t want the adjustable unit to create a clover leaf pattern for
example. One null might take out the interference but another null towards the
desired receiving direction might be created and is not desired.
I hope I’m explaining this well.
Regards , Kenny K2KW
> On Dec 16, 2023, at 9:47 PM, Rick Kunath <k9ao@yahoo.com> wrote:
>
> What's your application Kenny and what would you be feeding the antenna
> output of the phaser into?
>
> Rick Kunath, K9AO
>
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|