Hi Don,
Thanks for your reply.
My bev system has 3 bevs starting from the same point, 330º , 0º and 45º.
I understand what you mean but unfortunately I think the relays are not a
good solution for me because imagine I am doing SO2R, R1 on 160m using 45º
bev and R2 on 80m using 330º bev. This means 2 bevs from the same point
will be used, meaning 2 relays will be on...
73's Filipe Lopes
CT1ILT - CR6K
F4VPX - TM3M
2016-03-22 16:12 GMT+01:00 <donovanf@starpower.net>:
> Hi Felipe,
>
> As W4ZV noted in his posting, three meter ground rod spacing was
> not enough when he brought multiple Beverages to a common point.
>
> A much better solution is to use inexpensive hermetically sealed
> relays to connect only the selected Beverage to a single ground rod.
>
> 73
> Frank
> W3LPL
>
> ------------------------------
> *From: *"Filipe Lopes" <ct1ilt@gmail.com>
> *To: *"k1fz" <k1fz@myfairpoint.net>, "topband" <topband@contesting.com>
> *Sent: *Tuesday, March 22, 2016 1:17:51 PM
> *Subject: *Re: Topband: : Re: 1 center point to ground all 8 beverages??
>
>
> what about 7 ground rods 20cm apart, will it do ?
>
>
> 73's Filipe Lopes
> CT1ILT - CR6K
> F4VPX - TM3M
>
> 2016-03-22 14:09 GMT+01:00 K1FZ-Bruce <k1fz@myfairpoint.net>:
>
> >
> > ----- Forwarded message from K1FZ-Bruce -----
> >
> > Date: Tue, 22 Mar 2016 09:04:06 -0400
> > From: K1FZ-Bruce
> > Reply-To: k1fz@myfairpoint.net
> > Subject: Topband: Fwd: Re: 1 center point to ground all 8 beverages??
> > To: Topband
> >
> > I agree. We have been thinking of switching at the coax cable location.
> > Will need to correct my Beverage notes page.
> >
> > The W4ZV and W3LPL method will work.
> >
> > 73
> > Bruce-K1FZ
> >
> > www.qsl.net/k1fzbeverage_antenna.html
> >
> > http://www,qsl.net/k1fz/beverage_antenna.html
> >
> >
> > ----- Forwarded message from Bill Tippett -----
> >
> > Date: Tue, 22 Mar 2016 05:19:48 -0400
> > From: Bill Tippett
> > Reply-To: Bill Tippett
> > Subject: Re: Topband: 1 center point to ground all 8 beverages??
> > To: topband
> >
> > W3LPL:
> >
> > >Another solution is to use
> > relays to connect only the selected Beverage to the ground rod
> > and disconnect the other seven.
> >
> > I've done this for 31 years from 3 different locations with no problems.
> > From a 2011 post on this subject:
> >
> > _________________
> > Topband Reflector Archives - http://www.contesting.com/_topband
> >
> > ----- End forwarded message -----
> >
> > _________________
> > Topband Reflector Archives - http://www.contesting.com/_topband
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
>
>
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|